RESIN FLooring TYPE

Type Name Description Duty Typical Thickness
1 Floor seal normally applied in two coats water based light up to 150u
2 Floor Coating applied in two or more coats usually solvent free light to medium 150u to 300u
3 High Build Coating applied in two or more coats light to medium 300u to 1000u (1mm)
4 Multi Layer Flooring aggregate "sandwich" system built up layers medium to heavy >2mm
5 Flow Applied self-smoothing medium to heavy 2mm to 3mm
6 Resin Screed Trowel Applied heavily filled sometimes sealed medium to heavy >4mm
7 Heavy Duty Flowable Flooring having a smooth surface Heavy to Very Heavy Duty 4-6mm
8 Heavy Duty Resin Flooring Trowel Applied effectively impervious very heavy duty >6mm
logos combined6jpg
High Build Coating

 

 

These are again generally solvent free epoxy or polyurethane coatings, but are applied at a higher film build of up to 1mm thickness, for extra durability. Reprotec UK Limited are trained and competent in all areas of floor preparation and coatings and not only use their own products, but are approved by all the major manufacturers i.e. Altro, Flowcrete, Resdev, Remmers etc.

 

Below is Reprotec Tufflor at an Automotive manufacturer in the North East.

 

 

 

 

Nissan Press Shop 032 (9)