[table sort="desc"]
Type,Name,Description,Duty,Typical Thickness
1,Floor seal,normally applied in two coats water based,light,up to 150u
2,Floor Coating,applied in two or more coats usually solvent free,light to medium,150u to 300u
3,High Build Coating,applied in two or more coats,light to medium,300u to 1000u (1mm)
4,Multi Layer Flooring,aggregate "sandwich" system built up layers,medium to heavy,>2mm
5,Flow Applied,self-smoothing,medium to heavy,2mm to 3mm
6,Resin Screed,Trowel Applied heavily filled sometimes sealed,medium to heavy,>4mm
7,Heavy Duty Flowable Flooring,having a smooth surface,Heavy to Very Heavy Duty,4-6mm
8,Heavy Duty Resin Flooring,Trowel Applied effectively impervious,very heavy duty,>6mm

logos combined6jpg



Designed to be a low cost option for large areas, they are usually water based epoxies, they contain no volatile organic compounds (VOC’s), They have been widely used by the industry and have a good track record.

They are normally a  two coat system and are easily applied to a well prepared floor, these types of coatings can last for years. They contain no nasty solvents and are very low odour. They are particularly effective on a good flat floor e.g. over a pumped cementitious screed, or a diamond ground floor. These are an effective low cost option usually for very large areas such as Warehouses etc.



Reprotec UK Limited are trained and competent in all areas of floor preparation and coatings and not only use their own products, but are approved by all the major manufacturers i.e. Altro, Flowcrete, Resdev, Remmers etc.

 Warehouse coated with Two coats of water based epoxy

warehouse ne